Key features -Rugged, compact, easy to use stroboscope for checking the rotating speed of machinery without physical contact or the need for reflective tape -Features high-intensity 7-LED array—4,800 Lux @ 6,000 FPM/30cm -Provides a high-efficiency LED solid-state light source with uniform flash characteristics that allow for higher flash rates—30-300,000 FPM (flashes per minute)
Key Features Velocity & bearing condition Used to monitor vibrations without installing equipment Rechargeable battery used with mains or in-car charger Sensor/cable fault indicator Display hold function Choice of metric or imperial measurement
Key Features Velocity & bearing condition Used to monitor vibrations without installing equipment Rechargeable battery used with mains or in-car charger Sensor/cable fault indicator Display hold function Choice of metric or imperial measurement
Benstone vPod Lite is the basic model of the vPod family of Smart vibration meters. Powered by the microprocessor, vPod Lite provides more useful features, yet is very simple and straight forward to use. It measures vibration levels in displacement, velocity and acceleration units. The selected unit and detection are shown on the screen, which makes it easy to read.
Benstone vPod is the standard model of the vPod family of Smart vibration meters, which are powered by microprocessor-based technology. It can easily measure and conduct average or peak-hold the vibration levels, freeze the display and display the readings with user-selectable unit/detection. The battery charge indicator, screen backlight and sensor bias indicator are also standard feature.
vPod II is the most advanced model of the vPod vibration meter family. In addition to all the feaures of a standard vPod meter, a vPod II meter can store up to 1000 sets of vibration data. These saved data points can be recalled by entering the meter’s REVIEW mode. Every vPod II comes with an USB interface program for downloading the saved data from memory to a PC for post analysis or report building.
vPod Pro is our next generation smart vibration meter built around your need in machinery condition monitoring. With the innovatively designed sensor A52-IR, vPod Pro can measure vibration and temperature at the same time. The high-strength magnetic base secures the sensor for accurate transmission of high frequency signals from bearings or gears. After each measurement, vPod Pro displays 3 readings at the same time: vibration level, bearing condition and temperature. The severity status for each measurement is shown with easy to read background colors.
Overall machine and bearing conditions: vibration values are displayed with color coded alarm levels for ISO values and Bearing Damage (BDU). ISO Built-in Alarms Easily identify bearing problems with BDU Reading 800 line FFT (spectrum) Ruggedized IP67 case 3-year Limited Warranty The 9070 is a simple to use vibration monitoring and analysis tool that allows easy display of vibration signals. The meter automatically per-forms vibration analysis functions based on machine running speed to help diagnose faults such as unbalance, misalignment and looseness. Full Color OLED Display Easily identify problems with built in band filters: 1X (unbalance) 2X (misalignment) 3X (looseness) Built-in accelerometer with stinger. Optional long stinger and magnetic mount available
The Adash model A4900 is a multi-function portabl e meter and data-collector that bridges the gap between the basic and advanced FFT data-collector/ analyser. It is a complete machine condition expert system than gives results without the use of a computer or laptop. It is designed for the field maintenance persons, technician, engineer and co nsultant who need to analyse a rotating machine on-site without investing and carrying expensive instruments to site. This single meter can measure overall vibration measurement, band graph, 800 lines spectrum, 2048 samples time signals, temperature, rotation speed, strobe scope. In addition it incorporates a strobe scope, handy inspection torch and stethoscope. The A4900 caters to ISO 10816-3 with expert rules covering machine health vibration levels, that identify the prime machinery faults: Unbalance, Looseness and Misalignment. An anti-friction bearing health level indication is also incorporated . Many informative screens are available. Operation of A4900 is easy to use. Colours green, orange and red display the status. Determination of individual machine or bearings defect types is don e directly during operation, without need of use a computer or software. Despite the A4900 is very compact and rugged, it is designed and fits in the palm of a small hand. Nevertheless the A4900 is big in performance.
Fluke 805 vibration meter measures overall machine vibrations, bearing vibrations and temperature simultaneously. In order to ensure measurement repeatability, the device makes use of an innovative sensor that checks the force applied to the tip before the vibration measurement starts. The overall vibrations levels are compared to pre programmed alarm levels and machine condition is provided in four stages. Bearing condition is assessed automatically with crest factor plus parameter. With the use of this parameter it is not needed to know the shaft diameter and rotational speed of the bearing, neither the bearing class. Temperature measurements are conducted touchless with an infrared sensor. All measured values can be stored and exported to an MS Excel template to create trend plots that help to predict the machine- and bearing condition The unit has an audio out for listening to machine noise and a LED light torch to make dark measurement spots visible.
Harness the power of your smartphone to make simple, accurate and reliable vibration level measurements on critical machinery using the Digital Vibration Meter Kit Model K333D01-VM. Plug the industry exclusive Digiducer® USB Digital Accelerometer into your smartphone for the same advantages that reliability professionals have come to expect with piezoelectric accelerometers. The USB Digital Accelerometer’s wide range and accuracy captures machinery vibration events from imbalance to misalignment to bearing faults, gear mesh, and pump cavitation. With a hermetically sealed, stainless steel housing, the Digiducer is built to survive in tough environments.
SKF QuickCollect sensor kit This sensor is an easy-to-use, Bluetooth-enabled handheld sensor that connects to apps that work with both iOS and Android tablets and smart phones. Combining vibration and temperature sensing, overall data can be viewed on the spot in real time or pushed to the cloud for future analysis. The sensor is ideal for service, reliability, operations, or maintenance personnel as part of a walk-around data collection program. - Easy-to-use, handheld vibration and temperature sensor - Requires minimum training and experience - Provides instant feedback on vibration and temperature - Enables early identification of developing rotating machinery issues - Cost-effective and scalable entry-point for reliable rotation